BSIDE ESR02 Pro Digital Multimeter Transistor Diode Triode Resistor Tester
Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit
If using DC power supply, please choose DC 9V – 12V adapter (including 9V and 12V)
It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please replace it with a new one
Parameters:
Resistor: 0 – 50M ohm Resolution: 0.01 ohm
Capacitor: 25pF – 100mF Resolution: 1pF
Inductor: 0.01mH – 20H Resolution: 0.01mH
Capacitor ESR: 2uF-50mF Resolution: 0.01 ohm
How to use instructions:
Push “POWER / TEST” to power on and start a test, multiple measurements can be repeated by this key, auto power off 20 seconds
after measurement
Provide three kinds of socket, each socket pin 1, pin 2 and pin 3 are connected
There is a table “typical ESR value of electrolytic capacitor” at the back, it is for guiding only, these are typical value for
standard grade electrolytic capacitor at room temperature
Calibration:
Short the test pin 1, 2, 3 together and push “POWER / TEST” button, then the screen prompts to enter calibration, push the button
again within 2 seconds to confirm.
Few seconds latter the screen prompts to release pin 1, 2, 3, release them and wait for calibration finish
Package Weight: 0.25 kg
Package Size(L x W x H): 17.50 x 10.00 x 6.00 cm / 6.89 x 3.94 x 2.36 inches
Product Packing List:
Transistor Tester * 1
English Manual * 1
If you have interest to try our items, welcome to contact by email or whatsapp. 